Using Singapore mobile proxies with Dolphin Anty in 2026

the problem usually surfaces around the third or fourth account. the first two profiles ran fine for weeks, then a platform started asking for extra verification on the newer ones. fingerprints looked clean. canvas and webGL were randomized, browser versions were plausible. what gave it away was the IP. not the fingerprint layer at all. datacenter ranges have been burned so thoroughly by bulk account operations that platforms have started soft-flagging any new registration that originates from them, regardless of how convincing the browser profile looks. mobile IPs from a real carrier, especially from a market the platform actually cares about, change the risk scoring in a way that no amount of fingerprint tuning can replicate on its own.

why Dolphin Anty hits walls without residential mobile IPs

Dolphin Anty does the hard part of browser isolation extremely well. the fingerprint subsystem handles canvas noise, webGL vendor strings, timezone matching, screen resolution, font enumeration, and a dozen other signals that trip up simpler anti-detect setups. what it cannot do is change what the IP address says about you at the network layer. and in 2026, platforms running serious fraud detection have gotten much better at correlating IP reputation scores with account risk buckets.

the most common failure mode for Dolphin Anty users on datacenter IPs is what you might call a silent throttle. the account stays live, logins work, but engagement actions get silently dropped or delayed, ad campaigns are reviewed manually rather than auto-approved, or SERP rankings you’re trying to monitor return results that are clearly cached or clipped. the platform knows something is off but it does not ban you immediately because that would tip off the operator. it just degrades the session until the account stops being useful.

VPN IPs are a different failure mode. VPN exit nodes, even residential-labeled ones from aggregator pools, tend to share a relatively small address space across many users. the same /24 that your Dolphin Anty profile uses today has been used by thousands of other sessions over the past year. that history is what matters. IP reputation systems score addresses on behavioral history, not just ASN classification. a real mobile IP on a SingTel or StarHub modem has essentially no shared history beyond what your own sessions have built. it looks exactly like a Singapore resident picking up their phone and opening an app.

for workflows that involve Southeast Asian platforms, the carrier ASN is an additional signal. Shopee, Lazada, Grab, and similar platforms have significant engineering investment in regional fraud detection. they know what a normal SG mobile session looks like at the network level. requests coming from a Singapore-classified IP that resolves to a datacenter ASN fail a trivial lookup that happens before any behavioral model even runs.

setting up SMP credentials in Dolphin Anty

SMP provides credentials in the standard ip:port:username:password format. each proxy endpoint is a specific modem port, and the username/password pair authenticates your session to that modem. the port number determines whether you’re hitting an HTTP or SOCKS5 endpoint, so make sure you know which protocol you’ve chosen before pasting the string.

in Dolphin Anty, proxy configuration lives at the profile level. when you create or edit a browser profile, go to the Proxy tab. set the type to either HTTP or SOCKS5 depending on your SMP plan. then fill in the four fields:

Host:     <ip from your SMP dashboard>
Port:     <port from your SMP dashboard>
Login:    <username>
Password: <password>

after saving, use the Check Proxy button before you do anything else with the profile. this hits an external IP-check service and returns the resolved IP and geolocation. confirm you’re seeing a Singapore IP from the expected carrier (SingTel, StarHub, M1, or Vivifi depending on which modem your port is assigned to). if the check returns your real IP or a different country, double-check that the proxy type matches what SMP issued (HTTP vs SOCKS5 are on different ports) and that you haven’t accidentally left a system-level proxy active.

one thing that catches people is assigning the same proxy to multiple profiles. Dolphin Anty does not prevent this at the UI level. if two profiles share the same modem port with the same credentials, both sessions are routing through the same IP. that defeats the isolation model entirely and will look like two accounts sharing a device, which is exactly the signal you’re trying to avoid. assign one proxy endpoint per profile, and track assignments externally if you’re managing more than a handful of profiles.

for SOCKS5 specifically, check whether your Dolphin Anty version has SOCKS5 UDP support enabled. most multi-account workflows don’t need UDP, but if you’re running any WebRTC-heavy platform that does IP leak detection via STUN, you want the SOCKS5 proxy to fully cover the WebRTC traffic. Dolphin Anty handles this at the profile level under the WebRTC settings tab. set it to replace rather than real and confirm the replacement IP matches your proxy IP on the check.

if you want to understand the deeper protocol differences before committing to one or the other, HTTP vs SOCKS5 mobile proxies covers the tradeoffs in detail, including which protocol handles non-HTTP traffic more gracefully.

rotating IPs per request or per session

the choice between rotating and sticky endpoints is the most consequential configuration decision in a Dolphin Anty setup, and it’s not really about proxies. it’s about what the platform expects from a normal user session.

sticky sessions keep your IP fixed for the duration of a defined window, typically 10 to 30 minutes depending on SMP’s session configuration for that endpoint. use sticky when the platform you’re working with ties session state to the originating IP. login flows almost always fall into this category. if you authenticate on IP A and the next request in the same session comes from IP B, many platforms will treat that as a session hijack attempt and force re-authentication or trigger a step-up challenge. account registration, posting actions, and anything that reads from a server-side session cookie all belong in sticky mode.

rotating endpoints change the IP on each new connection. this is appropriate for scraping, monitoring, and read-only operations where you’re not maintaining authenticated state. if you’re using Dolphin Anty profiles specifically to gather competitive data or monitor search results for SEA markets, you can wire those profiles to a rotating endpoint and get fresh IP attribution on each load without worrying about cookie continuity.

SMP exposes the rotation behavior through the endpoint you’re assigned. switching between sticky and rotating is a matter of using the correct port or URL pattern from your dashboard. do not manually construct endpoint URLs based on assumptions. use exactly what the dashboard provides.

a practical pattern for Dolphin Anty workflows is to have two sets of profiles: one set with sticky endpoints for account-action profiles (posting, engaging, transacting), and a separate set with rotating endpoints for monitoring and research profiles. your action profiles get session-safe IPs and your research profiles get maximum IP diversity without any configuration gymnastics.

here’s a minimal example of testing your sticky vs. rotating behavior from outside the browser, using curl, before you commit a profile to a workflow:

# test sticky session: run twice, expect the same IP both times
curl -x socks5h://<user>:<pass>@<host>:<sticky-port> https://api64.ipify.org
curl -x socks5h://<user>:<pass>@<host>:<sticky-port> https://api64.ipify.org

# test rotating session: run twice, expect different IPs
curl -x socks5h://<user>:<pass>@<host>:<rotating-port> https://api64.ipify.org
curl -x socks5h://<user>:<pass>@<host>:<rotating-port> https://api64.ipify.org

if the sticky port returns two different IPs, your session window has expired between calls or the port is misconfigured. contact SMP support before wiring it to a Dolphin Anty profile.

three real workflows where this combo wins

SEA marketplace multi-account management

running multiple seller accounts on Shopee or Lazada from a single operator requires that each account looks like an independent Singapore-based device. platforms in this space have sophisticated device graph models. they link accounts by shared IPs, shared device fingerprints, and behavioral similarity across sessions. Dolphin Anty handles the fingerprint and behavioral isolation. SMP handles the IP layer.

the key is that a real SG mobile IP from SingTel or StarHub is what an actual individual seller using their phone looks like. a datacenter IP, even one labeled as Singapore, does not match that baseline. assigning one sticky SMP endpoint per Dolphin Anty profile, and keeping that endpoint consistent for that account over time, means the platform’s device graph sees each account as a distinct persistent identity with a consistent IP history.

ad account management for SG-targeted campaigns

facebook and google have tightened their policies on agency-managed ad accounts significantly. running multiple business manager accounts or multiple ad accounts under independent billing identities requires strict separation at every layer. an IP that’s been previously associated with a banned or flagged account can transfer risk to new accounts created from the same IP, even across different browser fingerprints.

SG mobile IPs from SMP are carrier-fresh. they have not been cycled through bulk account operations by other customers the way aggregated residential proxy pool IPs have. for ad ops teams managing SG-market campaigns where the accounts need to look like local businesses run by local operators, the carrier attribution matters. a SingTel ASN reads as a Singapore mobile user. that’s the baseline the platform is comparing against.

SERP and price monitoring with session continuity

SEO research workflows in Dolphin Anty often involve running profiles that simulate persistent local users to get unbiased search results or localized pricing. mobile proxies for SEO research covers the broader use case, but the Dolphin Anty-specific angle is this: many monitoring workflows need to maintain a browsing history within the profile to get results that reflect what a returning user sees, not a fresh crawler.

that means the proxy assignment needs to be sticky across multiple sessions over days or weeks. SMP’s sticky endpoint configuration supports this. pairing a Dolphin Anty profile that has built up a realistic browsing history with a consistent SG mobile IP means the platform treats the profile as a returning local user rather than a probe. the data quality difference is significant for geo-specific SERP and price signals.

common pitfalls

user-agent and IP type mismatch: if your Dolphin Anty profile is set to a desktop Chrome user-agent but the IP resolves as a mobile carrier, some platforms will flag the inconsistency. mobile carrier IPs are strongly associated with mobile browser signatures. either set your profiles to a mobile Chrome or Safari user-agent, or use SMP’s HTTP endpoints (which some operators treat as more neutral in terms of device association). this one mismatch is responsible for a disproportionate number of silent failures.
IP rotation breaking session cookies: rotating endpoints and authenticated sessions do not mix. if you accidentally assign a rotating endpoint to a profile that’s doing login and post-login actions, the session will break at the first IP change. keep a clear inventory of which profiles are on sticky vs. rotating and review it any time you reconfigure proxy assignments.
not checking geolocation match: Dolphin Anty lets you set a timezone and geolocation manually within the profile. if you set the profile to Singapore timezone and Singapore geolocation, but the proxy IP resolves to a different location (even another SG IP in a different district), some platforms will see a minor mismatch. use the dashboard data to confirm exact geolocation and set the profile parameters to match precisely.
sharing one SMP account across many operators: SMP credentials are tied to your account, and each modem port has a fixed IP. if you share credentials across teammates or systems, you’ll get IP collisions that destroy the isolation model. every operator or machine should have its own credential set mapped to its own modem assignments.
ignoring the carrier when it matters: SMP runs on SingTel, StarHub, M1, and Vivifi. for most workflows any SG carrier is fine. but a handful of platforms, particularly banking apps and government services, apply carrier-level allow/deny logic for certain operations. if you’re testing against a specific SG platform and seeing unexpected blocks, check which carrier the assigned modem is on and whether that platform has known issues with specific carriers.
not testing before a campaign launch: always run a proxy check and a manual session walkthrough in the Dolphin Anty profile before committing it to an automated or high-stakes workflow. a misconfigured proxy that looked fine in the dashboard can fail in ways that silently route around the proxy rather than erroring out, depending on the OS and network stack.

when Singapore IPs specifically matter

the short answer is: any workflow targeting platforms that have meaningful Singapore-specific user bases, compliance requirements, or geo-fencing logic. this includes the obvious ones like Shopee SG, Lazada SG, Grab, Carousell, and the local banking apps, but it also includes global platforms where SG is a discrete market with its own content library, pricing tier, or ad auction. if the goal is to appear as a Singapore-resident user to a platform that has bothered to build per-country logic, only a real SG carrier IP gets you there reliably.

there is also a regulatory dimension that affects some research and compliance workflows. ethical mobile proxy use covers this in more depth, but the relevant point for Dolphin Anty operators is that some SG-targeted work (particularly in financial services testing, government portal QA, and app store optimization for the SG market) needs to originate from an IP that would be legally and technically plausible for a Singapore resident. datacenter IPs fail both tests. a real SingTel or StarHub mobile IP passes both.

for operators running SEA market entry research across multiple countries, the carrier-attributed Singapore IP is also the baseline that SEA regional users in neighboring markets compare against when making cross-border access decisions. a SG mobile IP carries specific meaning in the regional internet context that a US residential IP or a European datacenter IP simply cannot replicate, regardless of how the geolocation database labels it.

getting started

if you’re ready to wire up a real SG carrier IP to your Dolphin Anty setup, the Singapore Mobile Proxy plans page has current options for both sticky and rotating endpoints across the SingTel, StarHub, M1, and Vivifi carrier pool. plans are structured around modem port assignments, so you can start with a small allocation per profile and scale as your workflow grows. if you’re evaluating the proxy type itself before committing to a full setup, what is a mobile proxy covers how modem-based residential IPs differ from the datacenter and aggregated residential pools that most proxy providers sell, which helps clarify why the carrier attribution matters for the detection scenarios described above.